Kids Unicorn Thermal Mug, 350 ml

Kids Unicorn Thermal Mug, 350 ml

Check out this awesome thermal mug featuring everyone's favourite- unicorns! Perfect for kids!

 

Directions For Use

User Instruction

To open the flask, slide the lock (4) upwards to the horizontal position and press the button (5).
Unscrew the flask cap (3) and pour in the liquid.
Pour in hot liquids leaving approx. 4 cm of empty space from the upper edge of the flask.
Wait 10 minutes before putting the cap on.
Screw the cap (3) on, making sure that it adheres properly to the opening of the flask.
Before screwing on or unscrewing the cap (3), make sure that the valve (1) is in the open position.
Do not close the lid with the valve (2) protecting the opening until the liquid reaches a temperature enabling comfortable drinking.
You will avoid building up a pressure that can result in self-opening of the lid.
Close the lid (2) and slide the lock (4) downwards to the vertical position.
Having filled the flask, do not tilt it to the horizontal position.
Water vapour may accumulate and render the flask not water-tight due to increased pressure.
After pouring in hot liquid and closing the flask, open the valve for several seconds to release excessive water vapour.
If using with warm contents, please be careful when opening as pressure may build up and cause liquid to spray.
To prevent burns, the advised safety temperature of liquid is below 80°C.

 

Warning

Before each use, thoroughly wash the thermal mug with water and dishwashing liquid.
Do not use sharp cleaners, chlorine-containing cleaning liquids, bleaches or other strong substances to clean the cup.
If the product will not be used for a long time, it is recommended to keep it open.

Safety Measures

Check that there are no fine debris between the seals that can cause leaks.
Do not overfill the dish. The liquid should not be more than 80°C.
Always put the mug on a streight, non-slippery surface.
Move upright. Incorrect positioning of the product may cause leakage, accumulation of pressure inside the product.
The product is not a toy. Particular care is required when using the product near children.
When serving warm liquids, it is recommended to use the product under adult supervision.
Do not let the children drink directly from product with hot liquid.
Always check the liquid temperature before serving it to a child.
The thermos should not be heated in the microwave.
Never place the product near heat sources as this may damage the product.

 

Hot liquids can burn For the optimum heat retention of liquids, rinse the flask with warm water and then fill it with hot liquid.
To keep liquids optimally cool, rinse the flask with cold water and then fill it with cold liquid.
Do not use for storage and carrying of carbonated beverages.
In order to minimise potential bacteria growth, do not use for such products as: warm milk or food for children.
Do not leave citrus drinks in the product for more than 12 hours, possible fermentation may lead to an increase in pressure in the product. do not freeze the product

 

Dimensions

350 ml capacity.

 

Material

Stainless Steel, Polypropylene, Silicone

 

Country Of Origin

Made in China

 

Manufacturer Information

PLDZ, Pattison House, Midland Road, Walsall, WS1 3TX.